ابزارآلات جانبی و تجهیزات مرتبط با فلنج فیسر ماژولار با قابلیت پخ زنی اتوماتیک انتهای لوله و ولوهای بزرگ مدل SDB Beveler and EP 424 End Prep Tooling ساخت وش آمریکا
اطلاعات گارانتی :
یک سال گارانتیضمانت نامه :
پنج سال خدمات پس از فروش| Beveling Tools | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| Form Tool Insert Holder Kit |  |
||
| Low Range Holder ID 56-708-01 High Range Facing Insert Holder ID 56-708-02 37.5º Bevel Insert Holder 56-709-03 |
56-710-01 | For completing facing and beveling of pipe with a 37.5º angle, both standard and J-prep; requires cutting tool sold separately | |
| Form Tool Insert Holder – Includes holder, two insert screws & wrench. |  |
||
| 30º | 56-709-02 | For beveling pipe; requires cutting tool insert sold separately | |
| 37.5º | 56-709-03 | ||
| Form Tool Cutting Tool – Insert for facing & beveling, double sided. |  |
||
| HSS | 56-711-01 | Most materials up to 32 RC hardness | |
| Carbide | 56-712-01 | Materials harder than 32 RC | |
| Form Tool Cutting Tool – Radius 3/32 “J” bevel insert, double sided. |  |
||
| HSS | 56-711-02 | Most materials up to 32 RC hardness | |
| Carbide | 56-712-02 | Materials harder than 32 RC | |
| Counterbore Tooling | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| 4:1 Taper Counterbore Tool |  |
||
| Minimum pipe ID size: Low Range | 56-705-01 | Most pipes Maximum counterbore depth 1 1/8” (28.5mm) |
|
| Minimum pipe ID size: Medium Range | 56-705-02 |  |
|
| Minimum pipe ID size: High Range | 56-705-03 |  |
|
| Standard 3/8” x 3/8” (9.5mm x 9.5mm) High speed tool bit. Use with 56-424-00 and 56-424-01 |
56-713-00 | Most pipes |  |
| 10º ID Deburring Tool |  |
||
| Minimum pipe ID size: Low Range | 56-702-01 | 10º ID taper, most pipes | |
| Used for ID chamfering. Minimum pipe ID size: Medium Range |
56-702-02 |  |
|
| Used for ID chamfering. Minimum pipe ID size: High Range |
56-702-03 |  |
|
| 4:1 Counterbore Tool Kit | Maximum depth 3 1/8” (79.4mm) Minimum ID 6” (152mm) Standard tooling (EP 424 only) Most pipes |
 |
|
| Consists of tool insert holder 56-210-00 and 3 insert retaining screws. Requires insert 60-700-04 sold separately |
56-715-00 | ||
| Counterbore Tooling Insert |  |
||
| For use with 56-715-00 Tool Kit | 60-700-04 | ||
| Single Point Tooling | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| Single Point Holder Low range single point tool holder Requires tooling insert 52-701-01 sold separately. |
56-424-00 | Most materials less than 32 RC hardness |
 |
| Single Point Holder High range single point tool holder Requires tooling insert 52-701-01 sold separately. |
56-424-01 |  |
|
| Single Point Insert Standard 3/8” x 3/8” (9.5mm x 9.5mm) HSS Tool Bit for single point facing, beveling Use with 56-424-00 and 56-424-01 |
52-701-01 | Single point beveling most materials less than 32 RC hardness |
 |
| Single Point Flange Facing Tools | |||
|---|---|---|---|
| Description | Part Number | Application | Image |
| Flange Facing Tool Holder Kit Kit includes a Low Range 56-714-03 and High Range 56-714-02 insert tool holder, two tool inserts, two insert retaining screws and two screw wrenches. |
56-418-01 | Complete flange facing |  |
| Flange Facing Insert Tool insert for single point flange facing. Three-tipped insert for use with 56-418-01 Holder Kit |
56-710-00 | Flange facing and record grooving |
 |
